Tags

Related Posts

Share This

The Ins And Outs Of Surfboard Shaping

Surfboards come in various shapes and designs and the process involved in shaping them is indeed challenging and difficult. This is due to the fact that you need to accurately measure the board based on the customer’s information. Shapers who are more experienced can try their hand on more complicated shaping techniques. Surfboard shaping should be done with accuracy or the board will break or injure the surfer. Although everyone can attempt to shape a surfboard, only a few will be able to shape it with accuracy and creativity intertwined. More often than not, you need to have a specialized skill so you can shape an out of the ordinary surfboard.

The Factors That Affect Surfboard Shaping:

surfboard-shaper

Photo Credit : http://cargocollective.com/

As a surfboard shaper, you need to be familiar with the basic tools and spend ample time in the shaping room until you create the board that is deemed a perfect fit for surfers. You should also have the power of visualization so you can achieve accuracy and precision. There are special attributes that you need to possess for you to succeed as a surfboard shaper and you may need a shaping mentor to hone your skills. You should also understand that surfboard shaping involves various types of shapers such as scrubbers, whittlers, butchers and many others.

The process involved in shaping a surfboard is not only complicated but it also requires someone with a knack for precision. Keep in mind that no two surfboards are the same. You need to make sure that your surfboard meets the standards and addresses the surfer’s needs. One you shape to perfection, you will come to realize that your job is getting easier and easier. As much as possible, you should keep a record of each surfboard you shape and you need to go into details by listing down the dimensions and other specifics. You can also take photos of the boards you have already shaped and use them as your reference.

You need to be focused on surfboard shaping because in this job, there should be no room for mistakes or you will compromise the quality of the boards. Do not be afraid to try until you shape perfectly with little to no mistakes. You must also see to it that you have a shaping room conducive for working. Make sure that it allows you to create your designs without getting distracted. You should also pay attention to the information provided by surfers as these are necessary in creating custom surfboards.