Related Posts

Share This

Orientation About Piling

In the world of construction, there is a whole new meaning to some words. Though they may still be somewhat similar to the generic meaning but still there is a more comprehensive definition. Like for example the term piling, if you will check it out online, it is just a simple piling like putting something on top of one another. But in the world of construction, there is more meaning to this though of course, it still means putting each item on top of one another. However, the reason for this is to support a structure like a building for example. In short, piling in construction is a kind of technique used as foundation. When you say foundation, it means that it must be strong for it to be able to support what will be built on top of it and it is said that the piling technique is more advantageous to be used as the foundation.

© trive.it

© trive.it

Being this is a foundation technique, it goes without saying that it must be done durably and therefore, to accomplish the bottom line, the right materials will play a crucial role. Most of the time the materials use will either be wood, concrete or steel. So, depending on the contractor or maybe depending on the building that will be built on top of the foundation, a choice will be made. Just as long as the foundation will be able to support the said structure so that even if there are earthquakes, the building will not easily collapse, then the choice of materials should be fine.

Actually, ordinary foundation should be enough, it means that it shouldn’t have to be piling technique all the time if everything about the environment as well as the structure is just typical. But then again, since there are a number of factors that can make the environment where the structure will be built not in its ordinary or normal state, or maybe the structure is not the usual size, thus the piling technique should be incorporated as the foundation. Below are the situations or the times when the piling technique is needed as the foundation:

– If the water table is higher than typical
– When the water in the said environment is the type that can be affected with the water easily.
– When there is a deep trench foundation because possibly of a building before and removing it is not applicable.
– When the current foundation trenches are not stable
– When the surface where the building will be built is not suitable enough for the planned building.

There are different types of piling that can be incorporated though of course, the contractor should be able to tell the most appropriate one.

Yes, this is indeed the reason why letting amateurs do the excavation is such a big risk to your project. They might only incur expensive repairs in the future. Thus always make sure that you will be with the best piling contractor in Sydney.